ampCreated with Sketch.arrow-downCreated with Sketch.arrow-left-thickCreated with Sketch.arrow-leftCreated with Sketch.arrow-right-thickCreated with Sketch.arrow-rightCreated with Sketch.Group 12Created with Sketch.fbCreated with Sketch.fol-lowCreated with Sketch.followCreated with Sketch.iglogo-mainlogo_exsitemadebyarticlemailCreated with Sketch.newsletterCreated with Sketch.piCreated with Sketch.pinterestCreated with Sketch.searchCreated with Sketch.shareCreated with Sketch.special-arrowCreated with Sketch.twCreated with Sketch.videoCreated with Sketch.yt

Download Your Free Wardrobe Rehab Book!

Sign up to our newsletter to receive your free Wardrobe Rehab Workbook. Get 62 pages of tips, tricks and advice for creating the perfect wardrobe. Select your newsletter frequency below.

No Thanks
Wardrobe Rehab Ebook
Included Free
Subscribe

How to DIY a Vintage Bathroom Vanity

We bought a house! Nov 12, 2018

Yep, we love old stuff. But you knew that already, right?

There’s nothing more I like than breathing new life into something that’s old and a bit worn out, which is exactly what we set out to do with the bathroom in our renovation. When I first looked into bathroom vanities, I was surprised by just how boring most were, other than if you wanted to create something bespoke – which invariably costs a pretty penny. After doing a bit of research, I decided it was time to put my love of vintage furniture to use by using some to create the vanity. Which sounds easy, right? Find yourself a cabinet and away you go. Turns out it’s a little more tricky than it looks, so in case you want to do it yourself I decided to break it down for you!

The Inspiration

Here’s a few images that I saved to inspire this bathroom DIY!

The DIY

Step 1: Measure Your Space

The MOST important thing to do is to understand what the measurements are for the bathroom. This means, checking the length and width of the space in which the cabinet will sit and the heights of where taps and pipes should go. Because of the small space that we had, we were needing to find quite small pieces of furniture. It took us a while to find the perfect pieces!

Step 2: Choose Your Basin Type

There are three type of basin that you can choose from to add to your vanity top.

  • Under Mount Basins: Mounted below the countertop – the countertop though has to be non-porous, resisting any contact with water.
  • Over Mount Basins: A simple and common design, these are fitted just on top of the counter, with part of the basin sitting below the level of the cabinet.
  • Counter Top Basins: Also known as sit on bowls, these are placed just above the vanity. This is what we used.

I would suggest that the counter top basins are the easiest to use for this project, but it depends on what piece of furniture you find.

Step 3: Find the furniture (but think outside the box)

The next step is obviously finding the right piece of furniture to use, and keep in mind you can use a variety of furniture – don’t just look for cabinets! Instead of the basic four-legged table, your vanity can be anything you want it to be such as an old dresser, sewing machine desk or even cabinets. So long as you can find one with the right measurements! In the end, we used an old sewing table and washstand upstairs and a vintage school desk downstairs. On thing to understand is how the plumbing will fit inside the furniture, something with drawers can be difficult!

Step 4: Height is Key

Height is an absolute must to get right, from the height of the basin to the height of the countertop and then also the height of the tapware.  You’ll need to add the height of your basin to the height of your furniture to determine where your taps should go.

Step 5: Choose Tapware

There are lots of different types of tap ware, but for this project I would suggest that wall mounted is the best choice. The other option is also tap ware that’s attached to your basin.

Step 6: Consider the Surfaces

Know that the surface of the counter will get a lot of use and will likely have water on it which can cause damage over time. If in doubt, add a piece of marble or tile to the top of the furniture, or prime and paint the surface with paint that will stand the test of time.

Step 7: Plumbing

An open piece of furniture such as a desk will look great, just make sure you pick up a bottle trap that matches your tapware (the piping underneath) because usually plumbers will just use ugly white piping if you don’t get something nice. You’ll also need to consider how to create more storage underneath if you leave it open, we used a few baskets!

Painting a primer.

Ready to add the taps!

Voila!

It’s all in the details.

This is the grey version made from the sewing desk!

Share

Let us know your thoughts!

You Might Also Like

How To

How To Paint Furniture (And Why You Should!)

Would you paint wooden furniture? It’s a tough question, and I know...

Read