ampCreated with Sketch.arrow-downCreated with Sketch.arrow-left-thickCreated with Sketch.arrow-leftCreated with Sketch.arrow-right-thickCreated with Sketch.arrow-rightCreated with Sketch.Group 12Created with Sketch.fbCreated with Sketch.fol-lowCreated with Sketch.followCreated with Sketch.iglogo-mainlogo_exsitemadebyarticlemailCreated with Sketch.newsletterCreated with Sketch.piCreated with Sketch.pinterestCreated with Sketch.searchCreated with Sketch.shareCreated with Sketch.special-arrowCreated with Sketch.twCreated with Sketch.videoCreated with

Download Your Free Wardrobe Rehab Book!

Sign up to our newsletter to receive your free Wardrobe Rehab Workbook. Get 62 pages of tips, tricks and advice for creating the perfect wardrobe. Select your newsletter frequency below.

No Thanks
Wardrobe Rehab Ebook
Included Free

Before & After: Pleated Denim Mini Dress

DIY Jul 16, 2014

Because of travelling quite a lot recently I haven’t had the chance to hit my favourite thrift store as much as I would like, but a little while ago I got a chance to do a full afternoon wandering the racks and was rewarded with loads of cool pieces – and some not so cool things I thought might make great fodder for before & after projects. Once such item was this denim shift dress – long, unshapely and generally not something you’d catch me wearing. However, given the summer season I thought it might be fun to make myself a summer pleated dress, a little bit 90’s, and little bit Balmain and a whole lot of satisfaction when it was done. This was my first experience with pleating and let’s just say it was an eye opener!

Wearing: J Crew Bag, DIY dress, Daniel Wellington Watch, Zara heels, Thierry Lasry Sunglasses

This is said shift dress and what I did to it:

You need:

  • A shift dress
  • Scissors
  • A sewing machine
  • Needle and thread

How to:

1. I started by chopping the dress off at the point at which I wanted the pleats to start.

2. Because the shift dress was very long I was able to create two panels for the skirt part, allowing me to create much more volume with the pleats.

3. I then trimmed those panels to the same length and sewed them together so I had one long panel, then sewed the hem of the part of the panel that had originally sat in the middle of the dress.

4. I then took in the top so it was fitting on my body.

5. Now it’s time to create the pleats. I decided I wanted to create box pleats so they had a one over one under look (rather than side pleats like a netball skirt where they all face the same direction. What I did to do this was to measure both the bodice and the skirt panel, and decide on a pleat size that would divide perfectly (or approximately in my case) – thus allowing the panel piece of the skirt to fit together with the bodice. I worked out a pleat of 4cm wide (approx 1.5 in) would work well.

6. To create the box pleats I turned the fabric over to the wrong side and did two side pleats (that’s two folds) facing each other, turning over to make sure the resulting box pleat was around 4cm wide. At times it was approximate but I didn’t really mind!

7. I pinned as I went, but found when I got to the end the last pleat was a little short so I had to go along and redistribute a bit so I could finish the last pleat – very much a case of working it out as I went along!

8. I then pinned the pleats to the underside of the bodice.

9. Using the sewing machine, I secured the pleats to the bodice.


Outfit photos by Marion Tessier

Tags Denim DIY dress Instructionals Mini Dress sewing Tutorials

Let us know your thoughts!

You Might Also Like

Style / DIY

DIY Ruffle Wrap Skirt

I have to say, I may have switched over into holiday mode...